Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen
Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen
Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen
Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen
Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen
Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen
DomoSecret

Digital PH Water Tester Detection Meter Water Purity Quality Filter Pen

Regular price £29.99 £0.00
Description:
  • LCD Digital TDS-3 Meter Water Purity Tester
  • 100% new brand and high quality.
Specification:
  • Type of Display: Digital
  • With Backlight Or Not: No
  • DIY Supplies: Electric
  • Color: Grey / orange / lemon yellow / dark red / white
  • Accuracy: +/- 2%
  • Battery: 2 x 1.5V Button Cell battery (NOT included)
  • Item size: 15.5*3.1*2.3 cm
  • Range: 0-9990ppm
  • Dual Range: Measures form 0-999ppm, with a resolution of 1ppm. From 1,000 to 9,990ppm, the
  • resolution is 10ppm, indicated by drinking x10image, Factory calibrated
Features:
  • To lock the value, you can take out the water to read the value.
  • Long time, small power consumption.
  • Multifunction test and measurement of temperature.
  • Temperature compensation, automatic conversion into 25 Celsius TDS value.
Function:
  • Hold function: Saves measurements for convenient reading and recording
  • Auto-off function: Turns off meter after 10 minutes of non-use to conserve batteries
  • This item can be used in: water purifiers and filters, food (vegetable, fruits) & drink quality monitoring, pools and spas, aquariums, hydroponics.
Influence factor:
  • Water temperature: TDS pen can not be used to measure high temperature water (for example: Boiled water).
  • Flow of water: not to be used to test a larger body of water.
  • Area: TDS values are different because of the different pipes and water sources in each area.
Instruction:
  • Take off the pen cover.
  • Press the ON/OFF button, turn on the power of the test pen.
  • Insert the pen into the tested solution to the water level line.
  • Stir gently to remove the bubbles in the pen.
  • After 3 seconds, when the readings are stable, press the HOLD button and take the pen out to read the value.
  • After the use is finished, dry the water on the pen and cover the pen cover.
Note:
  • It will display only three digits. When the measured results is more than 999ppm, the screen display will be "xxx *10". For example, “2000” will appear as “200*10” in the screen.
  • Do not drop the entire TDS meter in water of dip beyond the maximum immersion level. This unit is not water-tight and is not covered under the warranty if water enters the unit.

Package Included:

  • 1 x TDS Meter Tester

Share this Product


More from this collection